Home

Hardie panel installation instructions

Installation Resource Center James Hardi

  1. COM1220-P2/4 12/15 stud furring strip** Batten Joint INSTALLATION: HardiePanel vertical siding must be joined on stud. Position fasteners 3/8 in. (9.5mm) from panel edges and no closer than 2 in. (50mm) away from corners
  2. The best way to get the performance you expect from your James Hardie products is to work with a professional contractor. Visit the James Hardie Pros website, JamesHardiePros.com, for installation instructions, care & maintenance information, and more. Find a local contractor >
  3. information, refer to our installation instructions and Material Safety Data Sheet available at www.jameshardie.com or by calling 1-800-9HARDIE (1-800-942-7343). FAILURE TO ADHERE TO OUR WARNINGS, MSDS, AND INSTALLATION INSTRUCTIONS MAY LEAD TO SERIOUS PERSONAL INJURY OR DEATH. SD050905 *Apply caulk in accordance with caulk manufacturer's writte
  4. Storage errors - The storage instructions for James Hardie are printed right on the bag, but some installers still manage to store the product incorrectly! All you have to remember is to (1) Store Hardie products indoors or under a waterproof cover and to (2) Store Hardie products on a pallet on level ground to keep them away from the ground.

INSTALLATION REQUIREMENTS - PRIMED & COLORPLUS® PRODUCTS HS11121_P1/5 6/13 WARNING: AVOID BREATHING SILICA DUST James Hardie® products contain respirable crystalline silica, which is known to the State of California to cause cancer and is considered by IARC and NIOSH to be a cause of cancer from some occupational sources. Breathing excessive amounts of respirable silica dust can also cause a. information, refer to our installation instructions and Material Safety Data Sheet available at www.jameshardie.com or by calling 1-800-9HARDIE (1-800-942-7343). FAILURE TO ADHERE TO OUR WARNINGS, MSDS, AND INSTALLATION INSTRUCTIONS MAY LEAD TO SERIOUS PERSONAL INJURY OR DEATH. SD050905 *Apply caulk in accordance with caul

before installation, confirm you are using the correct hardiezone® product instructions by visiting HARDIEZONE.COM OR CALL 1-866-942-7343 (866-9-HARDIE) These instructions are to be used for HardieTrim ® HZ™ Boards ONLY and are ONLY VALID in the following states: WA, OR, CA, NV, UT, ID, CO, WY, MT, AZ, NM HardieShingle ® Panels. HardiePanel ® Vertical Siding. HardieTrim ® Boards & Mouldings. HardieSoffit ® Pre-Cut panels. Collections. Reveal ® Panel System. Artisan ® Lap Siding. Also by James Hardie. HardieBacker ® Boards

How to Install Hardie Board Siding - 2021 DIY Step-by-Step

The James Hardie Co. manufactures and sells a range of exterior shingle, siding, board, panel and trim products. HardiePanel vertical siding is one of their key product lines, and, like other Hardie materials, it is constructed of cement and fiber for durability water-repellent panel sheathing or exterior panels classified as weather-resistive REPORTS AND JAMES HARDIE'S WRITTEN APPLICATION INSTRUCTIONS, MAY AFFECT SYSTEM PERFORMANCE, VIOLATE LOCAL BUILDING CODES REQUIREMENTS, AND VOID THE PRODUCT ONLY WARRANTY. weather-resistive barrier * LAP SIDING INSTALLATION INSTRUCTIONS Always wear. Learn how to install HardiePanel Vertical Siding products. This video will outline the basics of installing James Hardie's fiber cement products. For more in.. information, refer to our installation instructions and Safety Data Sheets available at www.jameshardie.com.au. FAILURE TO ADHERE TO OUR WARNINGS, SAFETY DATA SHEETS, AND INSTALLATION INSTRUCTIONS MAY LEAD TO SERIOUS PERSONAL INJURY OR DEATH. JAMES HARDIE RECOMMENDED SAFE WORKING PRACTICES CUTTING OUTDOORS 1 James Hardie® Edge Coating To touch-up cut edges and small damages. 1 litre / 500ml cans. Not supplied by James Hardie Waterproof Membrane The installation of a breather membrane acting as a vapour-permeable water-barrier is necessary for timber frame buildings or block walls where the wall is not considered waterproof

Siding Installation & Technical Docs James Hardie Pro

James Hardie's warranty is in effect for each individual piece, which means that if you decide to ignore the installation instructions for a few Hardie boards, you still have a full warranty on the rest of the pieces that are installed correctly The best way to get the performance you expect from your James Hardie products is to work with a professional contractor. Visit the installation website, www.hardieinstallation.com, for installation instructions, care & maintenance information, and more. Click here for common homeowner questions on safety and installation. Locate a contractor. BEFORE INSTALLATION, CONFIRM YOU ARE USING THE CORRECT HARDIEZONE® PRODUCT INSTRUCTIONS BY VISITING HARDIEZONE.COM OR CALL 1-866-942-7343 (866-9-HARDIE) Visit jameshardiepros.com for the most recent version. EFFECTIVE DECEMBER 2019 STAGGERED EDGE PANEL | STRAIGHT EDGE PANEL | INDIVIDUAL SHINGLES | HALF-ROUNDS PANELS HardieShingle ® Sidin before installation, confirm you are using the correct hardiezone® product instructions by visiting HARDIEZONE.COM OR CALL 1-866-942-7343 (866-9-HARDIE) Visit jameshardiepros.com for the most recent version 6 James Hardie Flooring Installation Manual February 2013 New Zealand James Hardie Flooring Installation Manual February 2013 New Zealand 7 3.1 GeNeral All construction must be carried out in accordance with the relevant building regulations and standards. Prior to installation, ensure the new / existing flooring and supporting framing is suitable

How to Install HardiePanel 4'x8' Stucco Sheets Hunke

important: failure to install and finish this product in accordance with applicable building codes and james hardie written application instructions may lead to personal injury, affect system performance, violate local building codes, and void the product only warranty. before installation, confirm that you are using the correct hardiezone. Step-by-step instructions: How to install Hardie Board lap siding, HardiePlank lap siding, and siding products, trim, and more. Follow these instructions for a long-lasting installation. HardiePlank or Hardie board lap siding products carry a 30-year warranty and installation is not much different than installing regular wood lap siding

1. Failure to install, finish or maintain this product in accordance with applicable building codes, regulations, standards and James Hardie's written application instructions may lead to personal injury, affect system performance, violate local building codes, and void James Hardie's product warranty. 2 Thanks for the clear instructions. We are thinking of using the Hardie panels (48 x 98) rather than lapped boards for a more contemporary look. I've noticed most houses like this seem to have a metal flashing between panels - any suggestions on how to install this

installation. James Hardie will not be responsible for rectifying obvious aesthetic surface variations following installation. IMPORTANT ExoTec™ Vero facade panels feature the natural colour and finish of fibre cement, and is subject to natural variations. James Hardie is not liable for any variation in look between ExoTec™ Vero facade. MATRIX™ PANEL 1190 8 18 2390 590 8 18 1790 890 8 20 2990 1190 8 45 SCYON™ CAVITY TRIM 2450 70 19 3.4 ACCESSORIES / TOOLS SUPPLIED BY JAMES HARDIE Installation Guide Scyon™ cavity trim Made in Australia & New Zealand Matrix™ panels Made in Australia SCYON™ MATRIX™ CLADDING INSTALLATION GUIDE PAGE 2 OF 8 ACCESSORIES DESCRIPTION James.

in accordance with applicable building codes and james hardie al injury, affect system performance, local building codes, on, confirm that are using the correct hardiezone instructions tion, visit www.haroiezone.com or call 1-866-942-7343 (866 cutting instructions installation primed & important: to install and thi HardieSoffit HZ10 Beaded Porch Panels Installation Instructions Download. HardieSoffit HZ10 Installation Instructions Download. HardieShingle® notched panels, HardieShingle® individual shingles, Hardie® Reveal® Panel System, HardieReveal2.0™ Panel System, 7/16″ HardieTrim® boards. Download About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features Press Copyright Contact us Creators.

James Hardie Sheet and Panel Claddings Fixing Matrix James Hardie Products James Hardie Installation Manual - Linings, Technical Specifications - Cladding for fixing instructions. Note: Always use a Short Brad Guide (13720) for brads from 19-30mm Installation. How to Install Reveal Panel Siding. This video outlines the basics of installing Reveal siding products. Get more information about Artisan siding installation here James Hardie is not responsible for damage caused by improper storage and handling of the product. Carry planks on edge. HardiePlank® ClaDDInG InstallatIon InstuCtIons VersIon 01/10 1. Overview 2 2. Storage & Handling 2 3. Materials 3 4. Ancillary products 4 5. Construction 5 6. ®Installation HardiePlank cladding 6 7. Clearances 8 8. Fry Reglet has designed a comprehensive trim system, specifically engineered for 5/16 fiber cement panels Use fasteners as specified in the James Hardie Tech Data sheet and in the Hardie Reveal Panel Installation Instruction. 5. Install panel using 1/2 inch (13 mm) spacers at horizontal joints. Leave bottom edge of panel above all horizontal trims exposed, no caulking shall be placed at this overlap of Horizontal Reveal Trim

1 INTRODUCTION James Hardie's ExoTecTM facade panel provides a durable, expressed joint panel appearance for building facades and fascias and, together with the ExoTecTM fixing system, offers versatility to architects and builders. A variety of design styles can be created including curved walls, panels installe James Hardie, the world leader in the manufacturing and development of fiber cement building products, has created this website to help builders and contractors with the installation of James Hardie® siding, trim, soffit and accessories such as HardieWrap® weather barrier, along with the handling and installation of products with ColorPlus® Technology

How to Install HardiePanel Vertical Siding - YouTub

Install the building paper (Photo 1), then follow your stud location marks and snap chalk lines (Photo 2) to guide both your nailing and your placement of siding joints. We're also using fiber cement trim boards. Since they're only 7/16 in. thick, rip 3/8-in. thick strips from treated 2-by lumber and use them to fur out the frieze boards. INSTALLATION REQUIREMENTS - PRIMED & COLORPLUS® PRODUCTS HS0915_P1/6 7/09 WARNING: AVOID BREATHING SILICA DUST James Hardie® products contain respirable crystalline silica, which is known to the State of California to cause cancer and is considered by IARC and NIOSH to be a cause of cancer from some occupational sources. Breathing excessive amounts of respirable silica dust can also cause a. A smooth, flat panel for a timeless aesthetic The applications for Hardie™ Flex Sheet cover a wide range of design solutions for residential and light commercial buildings. Hardie™ Flex Sheets are suitable for use in residential extensions, second story additions and gable ends installation instructions and other applicable This install guide's effective date is March 2021. PRODUCT INSPECTION Inspect all products thoroughly prior to Track, and Panel Installation sections to follow. 24 gauge 22 gauge METAL PANEL GAUGE-31.41 psf-39.29 psf ALLOWABLE PRESSUR

HardiePanel ® cladding is the durable and economical solution, particularly suitable for large renovation and new build projects. Trust James Hardie and use our fibre cement products knowing that you have made the best choice. Our products have an expected life expectancy of over 60 years and come with a 15 year warranty <iframe src=https://www.googletagmanager.com/ns.html?id=GTM-NTKKMSP>m_auth=0cFn5fvkCw_dy89re3lujA>m_preview=env-2>m_cookies_win=x height=0 width=0 style.

EasyLap Panel is a strong fibre cement substrate with a shiplap vertical joint, it's a quick and easy way to achieve a clean, textured look. The panel can be finished with a site applied roll on textured acrylic paint for that rendered look, or you can paint it smooth. Ideal to be used as external wall cladding in residential single and. TM Installation Instructions IMPORTANT NOTES 1. Failure to install, finish or maintain this product in accordance with applicable building codes, regulations, standards and James Hardie's written application instructions may lead to personal injury, affect system performance, violate local building codes, and void James Hardie's product. james hardie at 1-866-4hardie or www.hardiewrap.com important: failure to install and finish this product in accordance with applicable building codes and james hardie written application instructions may lead to personal injury, affect system performance, violate local building codes, and void the product only warranty Install materials in strict accordance with manufacturer's installation instructions. 1. Panels may be installed as soffit or ceiling over wood or steel framing; 20 gauge (33 mils) minimum to 16 gauge (54 mils), complying with local building code Wide panel format allows faster installation; Can be painted any colour, even the darker shades. Cost effective and long lasting; Resistant to fire, rot resistant and resistant to moisture damage; Up to 60 minute fire resistance rating (FRR) can be achieved when installed as per the James Hardie Fire and Acoustic Design Manua

HardiePlank Lap Siding Install Video - YouTub

to our installation instructions and Material Safety Data Sheet available at www.jameshardie.com or by calling 1-800-9HARDIE (1-800-942-7343). FAILURE TO ADHERE TO OUR WARNINGS, MSDS, AND INSTALLATION INSTRUCTIONS MAY LEAD TO SERIOUS PERSONAL INJURY OR DEATH. SD050905 1 from end of soffit 3/8 from edge of soffit less than or equal to 12 Wide. James Hardie HardiePanel Sierra 8 Cedarmill Vertical Siding is a fiber cement siding designed to mimic the look of real wood siding with less maintenance, better wear and a long life. Sierra 8 Panels feature a vertical groove that runs the length of the board every 8 in. to add interest and detail. HardiePanel exterior panel siding is Engineered for Climate and designed to hold up to the. Artisan. The 5/8-inch thickness and unique features of Artisan® siding provide a precise fit and finish as well as the freedom to miter corners for attractive, streamlined styling. Alternatively, complement Artisan siding with thick Artisan® trim to create an elegant look. Download Single Family Inspiration Guide

How to Install Reveal® Panel System by James Hardi

  1. A very diversified mix of frequently needed building products is available from Tamlyn®. We manufacture joist and truss hangers, brick ties, hurricane clips, straps, and holdowns, as well as special and custom welded hangers. Tamlyn® structural products are ICC-listed and Florida Building Code-approved. Conventional Metal Flashing
  2. -Speedy panel installation which saves time and labor -Offers an excellent contrast when paired with lap siding - Extremely low maintenance, and provides protection against hail, insects, woodpeckers, and anything else mother nature can throw its way -Protected by James Hardie's 30-year limited warranty . HardieShingle Installation Vide
  3. Panel • For use inside HVHZ: o HardieSoffit Panel fastener types, fastening schedule, and installation shall be in accordance with the Miami-Dade County Florida NOA 15-0122.04. Consult the HardieSoffit product installation instructions on the follow pages for all other installation requirements. • For use outside of HVHZ
  4. Shop James Hardie 48-in x 96-in-HZ10 HardiePanel Sierra 8 Fiber Cement Vertical Siding in the Fiber Cement Siding department at Lowe's.com. James Hardie HardiePanel® Sierra 8 Cedarmill® Fiber Cement Vertical Siding has a woodgrain appearance making it ideal for exteriors where
  5. ute fire resistance rating (FRR) can be achieved when installed as per the James Hardie Fire and Acoustic Design Manual. Classified as a lightweight cladding. Classified as non-combustible material. Low maintenance. Easy installation makes Axon Panel a fast and effective way to cover your home's exterior

Hardie® Textured Panels Modernize Your House With

Frequently Asked Questions Resource Center James Hardi

Technical Documents Product Support James Hardi

Manual 3 Keyway—A recess or groove in a manufactured shake or shingle siding panel. Lap—Where two siding panels join horizontally, one over the other. Lineal—Molding of various widths used to trim door and window openings at the jambs; also referred to as casing, window, or door surround. Miter Cut—A beveled cut, usually 45°, made at the end of Hardie Stucco: Easier to install than traditional stucco and this product is available in 4×8 or 4×10 panels. When installing on large areas it is recommended to use Hardie Trim pieces as. Hardie Board Installation Flashing Details. Hello all - we're nearing completion of Hardie siding installation and have major concerns with whether or not the house wrap and flashings were installed correctly. Many, MANY stupid mistakes throughout, some aesthetic but many functional 1. Turn off installation site power at the associated circuit breaker. 2. Verify that power has been turned off at the installation site by using an appropriate AC voltage meter. 3. Install the conduit and associated fittings. 4. Connect power and ground wires per electrical codes. 5. Turn power on. 6. Check controller operation Seems to me like the one thing that can wreck a Hardie install is residual moisture so I can't see how a furring strip install would be a bad thing, as long as you follow Willy and Hardie's advice, prime and paint everything. We just did a HardiePanel install on furring strips using 16ga hat channel with open joints

10 Most Common Install Errors with James Hardie Siding

James Hardie lap siding is a fiber-cement product that comes with a 30 or 50 year warranty, but any warranty will be void if the product is improperly installed. James Hardie isn't the only. The key advantages of machine painting Hardie Board prior to install: All sides of the Hardie Board are painted (even the edges) and therefore the entire board is completely sealed. (Although Hardie Board comes from the factory without the back of the board primed, according to James Hardie's support department, they say you can prime and.

important: failure to install and finish this product in accordance with applicable building codes and james hardie written application instructions may lead to personal injury, affect system performance, violate local building codes, and void the product only warranty. before installation, confirm that you are using the correct hardiezone tm. James Hardie siding is a fiber-cement product that comes with a 30 or 50 year warranty, but any warranty will be void if the product is improperly installed. James Hardie isn't the only manufacturer of fiber cement siding, but it's certainly the most popular. Listed below are a few of the most common installation defects that I find information, refer to our installation instructions and Material Safety Data Sheet available at www.jameshardie.com or by calling 1-800-9HARDIE (1-800-942-7343). FAILURE TO ADHERE TO OUR WARNINGS, MSDS, AND INSTALLATION INSTRUCTIONS MAY LEAD TO SERIOUS PERSONAL INJURY OR DEATH. SD05090 Axon Panel when direct fixed with HardieFlex nails to external walls can achieve fire ratings up to 60/60/60 to comply with C/AS1 of the NZBC when the walls are constructed in accordance with the current James Hardie 'Fire and Acoustic Design Manual'. When using Axon Panel fixed to CLD Structural Cavity Battens

Fiber Cement Board / James Hardie ( What to look for on

Install Hardie Board siding—Detailed attention will be given to the joints between siding boards. Apply ColorPlus touchup for a finished look—Extra care will be taken not to use too much paint when touching up after installation. Avoid Installation Problems by Hiring a Qualified Siding Contractor in Omah Panel Installation Guide. IMPORTANT NOTES 1. Failure to install, finish or maintain this product in accordance with applicable building codes, regulations, standards and James affect system performance, violate local building codes, and void James Hardie's product warranty. 2 Installation Instructions. Our installation guidelines will make the process of installing our products trouble-free. HardieSoffit® Panels - - - - - Working Safely . Working Safely with James Hardie® products Working Safely with James Hardie® products. Working Safely with James Hardie® products When installing the latest fiber cement shingle panels from James Hardie Products, reading and following their instructions is the key to success. To find a siding expert now, call toll-free: 1-800-985-365

Hardie Panel install question - GreenBuildingAdviso

THIS PRODUCT MAY RESULT IN PERSONAL INJURY. BEFORE INSTALLATION, CONFIRM YOU ARE USING THE CORRECT HARDIEZONE® PRODUCT INSTRUCTIONS BY VISITING HARDIEZONE.COM OR CALL 1-866-942-7343 (866-9-HARDIE) Store flat and keep dry and covered prior to installation (fig 1). Installing siding wet or saturated may result in shrinkage at joints INSTALLATION MANUAL HUB 81670 REV 8/18 ZIP SYSTEM ® SHEATHING // NOTES & LIMITATIONS WET BLOWN CELLULOSE INSULATION In addition to following manufacturer installation instructions, we recommend a maximum moisture content of the cellulose of less than 25% measured at the inside surface of the ZIP System® panel before closing the wall cavity James Hardie Panel Installation Manual Get Your James Hardie Panel Quote Today As the top-rated elite preferred James Hardie contractor serving the Denver area, we're honored to provide these incredible commercial siding solutions for improving your property's protection, functionality, and aesthetics Comprehensive installation guide to using HZ5® products that are Engineered for Climate® for northern and Midwestern climates. Discusses safety practices, proper tools, design and installation. James Hardie® HZ5® Siding and Trim Products Best Practices - Installation Guide ; HardieSoffit® Panels Introductory Installation Video

QuickPanel ® Systems & EasyTrim Reveals ®. No Charge Samples. REQUEST SAMPLES. QuickPanel ® Systems. a new customer-focused website. dedicated entirely to our innovative 4mm QuickPanel ® Pressure Equalized Rainscreen. VISIT QUICKPANELS.COM. EasyTrim Reveals ® Fiber Cement Trim System. Panel Built-to-last, HardiePanel 5/16 in. x 48 in. x 96 in. Primed Stucco Vertical Panel Siding by James Hardie is a durable, low-maintenance fiber cement siding with stucco texture for Spanish and Tudor-style homes

Rainscreen Clapboard Siding for an Energy-Efficient IslandJames Hardie HardiePanel Smooth ColorPlus 4&#39;x8&#39; | WimsattHardiFlex Durable Fiber Cement Board Manual Philippines

verify that subfloor panels are properly fastened to framing members. underlayment - minimum 11/32, 3/8 nom. (10 mm)-thick Exposure 1, plugged-face plywood or OSB with 1/8 (3 mm) gap between sheets; see page 9 for underlayment installation guidelines. any leveling of the subfloor must be done prior to installing DITRA-HEAT and DITRA-HEAT-TB Shop James Hardie 48-in x 96-in-HZ5 HardiePanel Stucco Fiber Cement Vertical Siding in the Fiber Cement Siding department at Lowe's.com. James Hardie HardiePanel® Stucco Fiber Cement Vertical Siding has a warm stucco texture making it a great choice for Spanish or Tudor home styles. AST Shop James Hardie 48-in x 120-in-HZ10 HardiePanel Statement Collection Iron Gray Cedarmill Fiber Cement Panel Siding in the Fiber Cement Siding department at Lowe's.com. James Hardie HardiePanel® Statement Collection™ Cedarmill® Fiber Cement Vertical Siding with ColorPlus Technology® has a woodgrai James Hardie produces a variety of styles to fit many different tastes. HardieShingle siding has the appearance of cedar shingles.; HardiePlank siding is the most popular and comes in a smooth finish or textured to mimic wood.; HardiPanel is vertical siding with a rustic board-and-batten appearance.; The Aspyre Collection includes lap siding made of extra thick boards for deeper shadows Reveal Panel with Recess Trim. Craft cleaner facades for an ultra-contemporary aesthetic. The hidden trim blends discreetly with the Reveal Panel, accentuating its smooth look while creating clean shadow lines. Reveal Recess trim is available primed and is compatible with primed Reveal panels Shop James Hardie 48-in x 108-in-HZ10 HardiePanel Sierra 8 Fiber Cement Panel Siding in the Fiber Cement Siding department at Lowe's.com. James Hardie HardiePanel® Sierra 8 Cedarmill® Fiber Cement Vertical Siding has a woodgrain appearance making it ideal for exteriors where